CHUCKS - See Also T3953 |
|
 |  |
12"W x 36"L x 3.75"H NO NAME ELECTROMAGNETIC CHUCK, 1.76/0.88 AMP, 110/220 VOLT
Inventory ID:7875 Model:SF 30/90 |
|
 | |
14"W x 24"lx 5"h magna lock electromagnetic chuck, 8 amp, 110 volts
Inventory ID:7876 Model:HU-1424 |
|
 | |
15" 3 jaw scroll chuck, b s w , 5.25" spindle bore, D1-11
Inventory ID:8510 Model:3 JAW SCROLL |
|
 | |
15" 3 jaw scroll chuck, b s w, 5.25" spindle bore, d1-11
Inventory ID:8511 Model:3 JAW SCROLL |
|
 | |
16" x 40" O. S. WALKER, MAGNETIC, 3.5" HEIGHT, 1" x 2.5" GRID, TOUCHPAD CONTROL
Inventory ID:7257 Model:16X40 INT |
|
 | |
21" 3 jaw chuck for a warner and swasey 3a turret lathe, 6 3/8"hole
Inventory ID:8604 Model:M2320 |
|
 | |
22" X 168" X 11" Walker Dual Surface Magnetic Chuck
Inventory ID:8555 Model:W75C |
|
 | |
24" 4 JAW CHUCK, INDEPENDENT, 7 3/4" BORE, D1-11
Inventory ID:8516 Model:4 JAW INDEPENDENT |
|
 | |
24" FACE PLATE W/D1-11 MOUNT
Inventory ID:8515 Model:FACE PLATE |
|
 | |
24" FACE PLATE W/D1-11 MOUNT
Inventory ID:8514 Model:FACE PLATE |
|
 | |
24" hydraulic Chuck, 3 jaw, A-15, 13" bolt circle, w/ actuator
Inventory ID:8594 Model:24" |
|
 | |
4 jaw, m, independent jaw, 18", 4" bore, d1-8
Inventory ID:8513 Model:4 JAW INDEPENDENT |
|
 | |
4 JAW, M, INDEPENDENT JAW, 18", 4" BORE, D1-8
Inventory ID:8512 Model:4 JAW INDEPENDENT |
|
| |
LIST OF CHUCKS
Inventory ID:5499 |
|
| |
LOT MISC. ELECTROMAGNETIC CHUCKS
Inventory ID:7825 |
CHUCKS, MANUAL |
|
 | |
49" FLATBACK 4-JAW MANUAL CHUCK WITH 12 T-SLOTS, 7" THICK
Inventory ID:7976 |
|
 | |
6" UNION 3 JAW CHUCK
Inventory ID:8379 Model:6" |
|
 | |
7.5" BUCK 3 JAW CHUCK, FLAT BACK
Inventory ID:8378 Model:7.5 inch |
CHUCKS, POWER |
|
 | |
12" SAMCHULLY 3 JAW POWER CHUCK, UNUSED, MODEL HH-212, PLAIN BACK, INTERCHANGEABLE WITH KITAGAWA BB SERIES
Inventory ID:8179 Model:HH-212 |
|
 | |
12" SAMCHULLY 3 JAW POWER CHUCK, UNUSED, MODEL HH-212, PLAIN BACK, INTERCHANGEABLE WITH KITAGAWA BB SERIES
Inventory ID:8178 Model:HH-212 |
|
 | |
19.7" SMW BIG BORE 3 JAW POWER CHUCK, MODEL 500/160, 6.3" SPINDLE BORE, FRONT AIR ACTUATED
Inventory ID:8227 Model:BIG BORE 500/160 |
|
 | |
24" HYDRAULIC 3 JAW CHUCK, A1-11 SPINDLE MOUNT, LOGANSPORT ACTUATOR, OFF OF A W&S SC-25
Inventory ID:8461 |
|
 | |
6.5" SAMCHULLY 3 JAW POWER CHUCK, UNUSED, MODEL HS-06, 6000 RPM, CAN REPLACE KITAGAWA B206
Inventory ID:8176 Model:HS-06 |
|
 | |
6.5" SAMCHULLY 3 JAW POWER CHUCK, UNUSED, MODEL HS-06, 6000 RPM, CAN REPLACE KITAGAWA B206
Inventory ID:8175 Model:HS-06 |
|
| |
6.5" SEOAM 3 JAW POWER CHUCK, MODEL CAH-6, 6000 RPM, UNUSED
Inventory ID:8168 Model:CAH-6 |
|
 | |
6.5" SEOAM 3 JAW POWER CHUCK, MODEL CAH-6, 6000 RPM, UNUSED
Inventory ID:8166 Model:CAH-6 |
|
 | |
6.5" SEOAM 3 JAW POWER CHUCK, MODEL CAH-6, 6000 RPM, UNUSED
Inventory ID:8167 Model:CAH-6 |
|
 | |
6.5" SEOAM 3 JAW POWER CHUCK, MODEL CAH-6, 6000 RPM, UNUSED
Inventory ID:8169 Model:CAH-6 |
|
 | |
6.5" SEOAM 3 JAW POWER CHUCK, MODEL CAH-6, 6000 RPM, UNUSED
Inventory ID:8165 Model:CAH-6 |
TABLES, FLOOR & LAYOUT PLATES, (Radial & Boring Mill) |
|
 | |
26" X 40" DEVLIEG SUB TABLE, 5 T-SLOTS, 6" TRAVEL
Inventory ID:6738 |
|
 | |
44" X 144" X 8.5" T SLOTTED TABLE, 5-2" T-SLOTS THAT ARE SPACED 8" APART FROM CENTERLINE
Inventory ID:8539 |
|
 | |
44" X 72" T-SLOTTED TABLE MOUNTED ON LEGS
Inventory ID:8568 Model:T SLOTTED TABLE |
|
 | |
48" X 10''6" X 16" THICK T-SLOTTED TABLES, (8 AVAILABLE)
Inventory ID:8455 |
|
 | |
IRON WORK TABLE, 24" X 160"
Inventory ID:8578 |
TABLES, N/C & CNC |
|
 | |
20" troyke nc rotary indexer, horizontal, tailstock, 1980
Inventory ID:8599 Model:U-20-NC |
TABLES, ROTARY |
|
 | |
13" x 13", advance, 10" cross sliding, .001 dial
Inventory ID:5201 |
|
 | |
36" X 36" PORTAGE AIRLIFT TABLE, 9" HEIGHT, T-SLOTTED
Inventory ID:8180 Model:36 |
|
 | |
40" WISCONSIN DRILL HEAD, VERTICAL ROTARY TABLE , BOTH HEADS DRIVEN, PROGRAMMABLE, 180 POSITIONS, SERVO DRIVEN, 1995
Inventory ID:8448 Model:VHP / VGF |
|
 | |
40"EIMELDINGEN, VERTICAL CNC ROTARY TABLE WITH TAILSTOCK ON 100" SLIDE, 1992, 26,000 LB CAP.
Inventory ID:8411 Model:5-1010 |
|
 | |
48" x 48" LUCAS, HYD., 24,000 LB. CAP., HYD CLAMPING, T-SLOTS
Inventory ID:7920 Model:48 |
|
 | |
48" x 48", 10" HIGH, SHOT PIN DESIGN, 15 DEG. INCREMENTS
Inventory ID:6332 |
|
 | |
60" x 96" Gidding & Lewis, 48" cnc controlled cross slide,
Inventory ID:8409 |
|
 | |
72" x 108" Gidding & Lewis hydrostatic, 72" cnc controlled cross slide, 25,500 lb part cap., new 1993
Inventory ID:8410 Model:72 x 108 |
|
 | |
78" SIMMONS POWERED CROSS SLIDE ROTARY TABLE
Inventory ID:8214 Model:78" SQUARE |
TOOLING & ACCESSORIES - (See Also Specific Categories) |
|
 | |
10 PIECES OF MISCELLANEOUS PUNCH AND DIE SETS
Inventory ID:8390 Model:PUNCH TOOLING |
|
 | |
16" X 60" angle plate
Inventory ID:8427 |
|
 | |
6 - 45 TAPER TOOL HOLDERS
Inventory ID:8342 |
|
 | |
aloris ca toolpost with 6 holders, for 14-20" lathes
Inventory ID:8136 Model:CA |
|
 | |
angle plate 24-1/2"W X 60-1/2"H X 30-1/2"D, drilled and tapped
Inventory ID:6745 |
|
| |
angle plate, 18" x 6" x 36" , machine products, machined face plate,
Inventory ID:8006 |
|
 | |
BOX OF VARIOUS DRILL BITS
Inventory ID:8337 |
|
 | |
MISC 50 TAPER TOOL HOLDERS
Inventory ID:7305 |
|
 | |
REBUILT BY SKF SPINDLE CARTRIDGE FOR HOFFLER GEAR GRINDER
Inventory ID:8496 Model:1033293-2 |
|
 | |
SMW OMNIREST MODEL EM 2.1, AUTO SELF CENTERING STEADY OR FOLLOW REST, CLAMPING RANGE .78"-3.93"
Inventory ID:8603 Model:EM 2.1 |
|
 | |
SMW OMNIREST MODEL EM3.1, AUTO SELF CENTERING STEADY OR FOLLOW REST, CLAMPING RANGE 2.0" - 6.7"
Inventory ID:8331 Model:EM 3.1 |
|
 | |
SPINDLE CARTRIDGE FOR NILES GRINDER
Inventory ID:8497 Model:332737 |
|
| |
TOOLING-transformers, chip conveyors, holders, misc.
Inventory ID:5963 |
|
| |
VARIOUS PRESSBRAKE DIES, MALE AND FEMALE
Inventory ID:5623 |
